Skip to content
Serving Boynton Beach and nearby cities Open 24 hours, 7 days a week · (561) 834-7669

Wallpaper Mural Installers in Delray Beach, FL

The short answer

We install custom and ready-made wall murals across Delray Beach. Exact measurements, a smooth primed wall and careful panel matching produce a continuous image, and most murals are hung in one visit.

A mural is the closest thing to a painted artwork that you can install in a day. Printed on large panels and matched edge to edge, it can cover a whole wall with a landscape, a vintage illustration, an abstract wash of color or a lush tropical scene. In Delray Beach, where homes range from oceanfront condos to inland family houses, murals are a favorite for bedrooms, nurseries, dining rooms and offices. WallEdge Installation travels about five miles south from Boynton Beach to install them.

From idea to order

Murals come in two broad types. Ready-made murals are sold in set sizes and may need trimming or extra panels to fit your wall. Custom-sized murals are printed to your exact dimensions. For custom prints, getting the numbers right is everything. We measure the wall at several heights and widths, note any variation in the ceiling line, and locate outlets, switches, vents and trim. We then recommend the bleed margin your printer needs so we have room to trim to a perfect fit.

It is also worth asking the printer for a proof or a sample swatch. Colors on a screen often look different on a wall in Delray's bright natural light, and a sample lets you check before committing to the full print.

Composition decisions we make together

Very few walls are a perfect match for a mural's proportions, so some cropping is inevitable. We help you decide what to keep and what to give up. Key subjects like a figure, a bird, a palm trunk or the setting sun should land where they are easy to see and not behind a cabinet or a lamp. Horizon lines usually look best at a comfortable seated eye level. Text or straight architectural lines in the image should not bend into an inside corner.

  • Keep focal points away from furniture that will sit against the wall
  • Center the image on the bed, sofa or table, not only the wall
  • Avoid placing faces or text near outlets and switches
  • Decide in advance which edges can be trimmed most

Preparing Delray Beach walls

Large printed images show every flaw underneath, from nail pops to orange-peel texture. We fill, sand and skim as needed, then apply a wallpaper primer so the panels can be positioned precisely and later removed cleanly. In condo units with concrete walls, we check for moisture and for form lines or ridges that would show through. Older homes with plaster may need more smoothing to look crisp.

Because outdoor humidity climbs from May through October, we ask that the room be kept air-conditioned for a day or so before installation. Letting the mural panels sit in that room overnight also helps them acclimate.

Picking a mural material

Non-woven murals are our usual recommendation for Delray homes. They are stable in humidity, they are installed by pasting the wall, and they can be removed later without much fuss. Vinyl-coated murals add scrubbability for kids' rooms, kitchens and busy hallways. Peel-and-stick murals are easy to reposition, but warm, damp air can loosen them, so they belong on smooth walls in consistently cool rooms. Paper murals have a lovely matte finish but require more delicate handling during installation.

The installation itself

We lay the panels out in order and confirm the sequence. The first panel is set against a plumb line, and every following panel is matched to it at the seam. After each panel we step back across the room to look for any drift in the image. Openings are cut after the panel is in position so the scene continues naturally around windows and doors. Once everything is trimmed at the ceiling and baseboard, we wipe the surface, clean up, and walk you through care.

Areas we cover

We install murals throughout Delray Beach, in ZIP codes 33444, 33445 and 33483, along with Gulf Stream, Briny Breezes, Ocean Ridge, Hypoluxo and Manalapan. Condo owners are welcome to share building rules ahead of time so we can plan access and timing.

More services in Delray Beach

Related

What to expect

How a visit goes

  1. Prep before paper

    Holes, texture, old adhesive and stains are dealt with first, then the wall gets a primer suited to the product.

  2. Layout you can see

    We show you where the pattern will be centered and where partial strips will fall before anything is pasted.

  3. Straight answers

    If a wall has a moisture problem or a paper is wrong for the room, we tell you plainly and suggest another route.

FAQ

Common questions

Don’t see your question? Call (561) 834-7669 and we’ll talk it through.

Should I order a custom-sized mural or a standard one?

Custom sizing gives the cleanest fit and least waste. Standard murals can work if the wall is close in size and some cropping is acceptable.

Can you install a mural around a window?

Yes. We position each panel first, then cut around the opening so the image continues above, below and beside the window.

What wall prep does a mural need?

A smooth, sound, primed surface. Texture, holes and ridges are filled or skimmed so they do not show through the printed image.

Are murals hard to remove later?

Non-woven murals on a primed wall usually come off dry in full panels, leaving the wall ready for paint or new wallpaper.

Do you install murals in condos?

Yes. We work within building rules on hours and access and check concrete walls for moisture before priming.

Planning a wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will set up a visit to measure and walk you through the scope.

Request Service Call (561) 834-7669
Call (561) 834-7669 Request Service