Skip to content
Serving Boynton Beach and nearby cities Open 24 hours, 7 days a week · (561) 834-7669

Accent Wall Installation in Atlantis, FL

The short answer

WallEdge Installation hangs single feature walls in Atlantis homes, usually finishing in one visit. We help choose the wall, check the surface, and recommend papers that tolerate South Florida humidity and air conditioning.

One papered wall can change how an entire room in Atlantis feels, and it asks far less of your schedule and your walls than covering every surface. WallEdge Installation drives about five miles north from Boynton Beach to hang accent walls in living rooms, bedrooms, dining nooks and home offices across this quiet Palm Beach County city. This page covers how we pick the right wall, which materials hold up in our humid air, and what the day of installation looks like, so you can plan a single feature wall with clear expectations.

Picking the wall that earns the attention

The wall you see first when you walk into a room is not always the one that should carry the pattern. In many Atlantis living rooms the obvious candidate is broken up by a sliding door, a thermostat, or a window facing the yard. A feature wall works hardest when it is mostly uninterrupted, so we often steer clients toward the wall behind a sofa, a bed headboard, or a built-in console instead.

Light matters too. Rooms with strong western sun in the afternoon can wash out metallic or very dark papers, while a north-facing bedroom may need something lighter to avoid feeling closed in. During the walkthrough we stand where you usually sit and look at each option, then talk through how a bold print, a soft texture, or a large-scale botanical would read from that spot.

  • Behind the bed: a calm, repeating print that frames the headboard
  • Dining area: a wall that anchors the table without crowding a small space
  • Home office: the wall that shows up behind you on video calls
  • Entry or hallway end: a short wall that rewards a bold choice

What Atlantis walls usually need before paper goes up

Many homes in Atlantis were built with concrete block exterior walls finished in plaster or drywall on the inside, and interior partitions in drywall. Both can take wallpaper well, but each has its quirks. Exterior block walls can carry a little more moisture, especially after a long stretch of summer storms, so we check them with a meter before priming. Older textured finishes, like light orange peel or knockdown, can telegraph through thin papers and may need skim coating.

Prep on a single wall is fast compared with a whole room, but it is still the part that decides how the finished wall looks. We patch anchor holes from old shelves or TV mounts, sand ridges, and roll on a wallpaper primer that lets the paper grip now and release cleanly when you want a change later.

Materials that suit a humid, air-conditioned house

South Florida homes live in two climates at once: steamy air outdoors from May through October and cool, dry air indoors whenever the AC runs. Paper that expands and contracts too much can open at the seams. For accent walls we generally favor non-woven papers and vinyl-coated options, which stay dimensionally steady and are easier to wipe down.

If you have your heart set on something more delicate, such as a hand-printed design, a mica finish or a natural fiber, we can still hang it. We simply explain the trade-offs, keep the room conditioned before and after installation, and choose an adhesive matched to the material.

How installation day runs

Most single accent walls are done in one visit. We move furniture away from the wall, lay drop cloths, remove outlet covers, and confirm the pattern layout with you before cutting a single strip. Centering a large motif on the wall, or on the bed, is a decision worth a minute of discussion. After hanging, we trim at the ceiling and baseboard, reinstall covers, clean up scraps, and put your furniture back.

Neighbors around Atlantis we also visit

Because Atlantis sits close to Greenacres, Lantana, Lake Worth Beach, Lake Clarke Shores and Hypoluxo, we are often working nearby on the same week. If a friend down the road wants a feature wall too, scheduling both together is easy to arrange.

More services in Atlantis

Related

What to expect

How a visit goes

  1. Prep before paper

    Holes, texture, old adhesive and stains are dealt with first, then the wall gets a primer suited to the product.

  2. Layout you can see

    We show you where the pattern will be centered and where partial strips will fall before anything is pasted.

  3. Straight answers

    If a wall has a moisture problem or a paper is wrong for the room, we tell you plainly and suggest another route.

FAQ

Common questions

Don’t see your question? Call (561) 834-7669 and we’ll talk it through.

How long does one accent wall take in Atlantis?

Most single walls are prepped and papered in one visit. Walls that need skim coating over heavy texture may need a second short trip after the compound dries.

Should I buy the wallpaper myself?

You can. Send us the product name and the wall measurements first so we can confirm the roll count, the pattern repeat and whether the paper suits a humid home.

Can an accent wall go on a concrete block exterior wall?

Yes. We check moisture levels first, then prime. If readings are high after heavy rain, we may wait a few days so the wall can dry out.

Will peel-and-stick work for a feature wall?

It can on smooth, primed walls in rooms that stay air-conditioned. It tends to lift faster in warm, damp spaces, so we discuss alternatives for those rooms.

Do you remove the old paper before hanging new?

Yes. Paper over paper is a common cause of bubbles and peeling seams, so we strip the old layer and repair the surface before installing.

Planning a wallpaper project?

Tell us about the room, the paper you have in mind and the condition of the walls. We will set up a visit to measure and walk you through the scope.

Request Service Call (561) 834-7669
Call (561) 834-7669 Request Service